Flat sensor MESEP

Subject to change without notice!

Rev. 0801

These metal for the use in conveyor belts and chutes. Using them it is possible to inspect 
bulk material as well as roll goods can be led directly over the sensor and thus be detected 
on metallic contamination. The sensors serve for quality assurance as well as for machine 
protection. Beyond that the of the process control e.g. for object counting or for completeness
checks. In combination with the optionally available control unit conveyor plants and dischargin
g units can be controlled directly.

fl at sensors are detectors for all types offi nished goods.  Foils or otherfl at detectors are also
appropriate for applications

® SP
 

Function & handling

The sensor has a dynamic working principle which means it only detects moving metallic pieces in the sensor range.
 If a non-moving metal piece is situated in the detection range, it does not excite a signal and therefore is not detected
. Contrary to sensors with a static workling principle this system allows operation with a much higher sensitivity. Thus even
small metallic pieces can be detected dead reliable. The operation of the sensor requires a control unit. This realises the
voltage supply for the sensors and allows the adjustment of all parameters. The detailed functioning and handling depend
s on the control unit.

Specific  Characteristics

- different sensor widths available (150 mm - 1200 mm)

- no metal-free zones necessary

- stable and shook proofed aluminium housing

- easy mounting

- separate control electronics with freely adjustable functions

- protection class IP67

- sensitivity adjustable via control electronics
 

Type MESEP® SP 150 - 1200
Mechanical data
Dimension L x W x H: Length x 210 x 60,5 mm
Length 150 mm - 1.200 mm (available in steps of 50 mm)2
Housing aluminium - strand profi l
Active surface polyurethane
Electrical data
Supply voltage 15 VDC
Output analog voltage output
Electrical connection PVC - cable; 2 m
Conditions of use
Storage temperature -10°C .. 70°C
Operating temperature -10°C .. 60°C
Protection class IP67
Speed1 1 - 120 m/min
Order information
Order number Length2
MESEP® SP 150 08317696900 150 mm
MESEP® SP 200 08317697124 200 mm
MESEP® SP 250 08317697240 250 mm
MESEP® SP 300 08317697341 300 mm
MESEP® SP 350 08410697442 350 mm
MESEP® SP 400 08317697601 400 mm
MESEP® SP 450 08317697702 450 mm
MESEP® SP 500 08317697803 500 mm
MESEP® SP 550 08317697912 550 mm
MESEP® SP 600 08410698020 600 mm
MESEP® SP 650 08317698114 650 mm
MESEP® SP 700 08317698164 700 mm
MESEP® SP 750 08410698264 750 mm
MESEP® SP 800 08317698296 800 mm
MESEP® SP 850 08317698348 850 mm
MESEP® SP xxx on request > 850 mm
Control unit (10 fold)
standard for top hat rail with reverting conductor
08349005000 08349005001 08349005002
Control unit (1 fold) 230VAC/24VDC → 08349005010 115VAC/24VDC → 08349005012hh

Type MESEP® SP 150 - 1200
Sensitivity
Maximum distance between sensor and test piece.
Fe-plate 30 x 30 x 1 mm 95 mm
Fe-plate 12 x 12 x 1 mm 68 mm
Nut M6 56 mm
Fe-ball Ø 7,0 mm 44 mm
Nut M4 44 mm
Washer M4 37 mm
Washer M3 33 mm
Nut M2,5 33 mm
Fe-ball Ø 4,5 mm 30 mm
Fe-ball Ø 3,0 mm 20 mm
Fe-ball Ø 2,5 mm 14 mm

Instructions for operation with control unit

Depending on the size of the sensor it has a certain number of analog outputs. Each output
has to be operated using a control unit. Additionally it is possible to use several single
control units or one multi control unit.

Sensor width [mm] Analog outputs
150 - 250 2
251 - 450 3
451 - 650 4
651 - 800 5
801 - 901 6
901 - 1000 7
1001 - 1200 8
 

1

Higher stream velocities can alloy the sensitivity.

2

Other lengths and in-between sizes on request.
Dimesions MESEP® SP 150 - 350


Dimensions MESEP® SP 350 - SP 1200